Roller Furling Headsail Measurement Form (for sail ordering)

Home

Name Phone # Boat Year Hull #

Hoisted Measurements

With tape rule fully hoisted on the head swivel shackle, please measure:

A- To the feeder (if any)

B- To the bearing surface of the tack fitting at the drum

C- To intersection of the headstay and the deck

D- To the cabin house at the mast

E- To the hull-to-deck joint

F- Pass tape around the shrouds as if it was the leech of the sail, then measure to the forward end of the track. Pull tight.

G- Pass tape around the shrouds as if it was the leech of the sail, then measure to the aft end of track

Deck Level Measurements

	Headstay - Aft		Centerline - Out
	H- From the Headstay/Deck intersect to the fwd edge of track		K- To the shroud base
	I- From the Headstay/Deck intersect to the aft edge of track		L- To the fwd edge of track
	J- From the Headstay/Deck intersect to the leading edge of mast		M- To the aft end of track

Comments or notes:

RF Unit Make & Model #? __________ Luff Tape Size?_________? UV Suncover (Sunbrella) Color?__________

UV Installation Side (Port - sail furls DOWN Clockwise/Starboard - sail furls DOWN Counterclockwise)?__________

Freeboard Measurements (for shear line and sheeting angle) - Tip of the bow DOWN to the waterline?__________ Along the rail, at the mast, DOWN to the waterline?__________

Back to Cruising Page / Back to Racing Page

Home